Signing in & signing out
Sign in with your password or with Google, first sign-in, two-factor authentication, forgotten passwords, signing out on one or every device, and the protections behind every sign-in.
10 min read
Everyone signs in to the same Presence app, in one of two ways:
| Way | Who can use it |
|---|---|
| ID and password | Everyone. Your institution gives you an ID (email, roll number or employee ID) and a temporary password; you choose your own password the first time. |
| Sign in with Google | Only when your institution turns it on, and only with a Google account your institution allows: the email must be the one on your Presence account, and your institution can limit it to its own domain. |
What you see afterwards depends on your role: students open their dashboard, teachers theirs, and each department its own desk.
This page is about the Presence app. The Presence website has its own, separate sign-in for sending forms (see below).
Before you start
You need two things from your institution:
| You need | Where it comes from |
|---|---|
Institution code, for example D7K2QX |
Your welcome email, or your administrator. Institutions on their own domain do not use one. |
| Your sign-in ID | Your email, roll number (students) or employee ID (staff), exactly as your institution recorded it |
Students sign in on the installed app on their own phone - see Install the app. Staff can use any browser, phone or computer.
Sign in with your password
- Open your institution’s Presence address.
- Enter the institution code. Presence remembers it on that device for next time.
- Enter your email, roll number or employee ID and your password.
- Tap Sign in. If you use two-factor authentication, enter the 6-digit code from your authenticator app.
Your first sign-in
New accounts start with a temporary password from your administrator. Sign in with it once; Presence then asks you to choose your own before anything else opens. It is quick:
- You do not type the temporary password again - you have just used it.
- Type a new password, or tap Suggest an easy-to-remember strong password for a phrase such as
Lotus-cedar-Piano-ripple-48. Use the eye icon to see what you typed. - A checklist turns green as each rule is met, and Type it again shows Passwords match.
- Tap Update password. You go straight to your dashboard.
Changing it later, from Profile → Change password, asks for your current password first.
Password rules
Presence follows current NIST guidance: length matters more than odd symbols. A new password must:
- be at least 10 characters;
- mix three of lower-case, upper-case, numbers and symbols, or be a passphrase of 16+ characters (for example
river-lamp-orbit-tiger); - not be a common password or a simple sequence;
- not contain your name, email, roll number or employee ID;
- not have appeared in a known data breach. Presence checks this using a privacy-preserving lookup: only the first five characters of a one-way hash leave the server.
Changing your password signs you out on every other device.
Sign in with Google
If your institution has turned it on, the sign-in page shows Sign in with Google above the ID and password form.
- Enter your institution code first (not needed on your institution’s own domain).
- Tap Sign in with Google and choose your Google account in Google’s window.
- If you use two-factor authentication, enter your 6-digit code as usual.
Good to know:
- Use the Google account with the email your institution has on record - usually your college email. Google never creates a Presence account; if no account at your institution uses that email, Presence says so and you can sign in with your password instead.
- The first Google sign-in links that Google account to your Presence account. After that, only the same Google account can sign you in, even if an email address is later reused. If you change Google accounts, ask your administrator to Reset Google link.
- Only Google accounts your institution allows can sign in. The email must already be on an account your institution created, and your institution can also accept only its own domain, for example
@your-university.edu- then a personal Gmail address is refused even if it is on your account. - Your Google password never reaches Presence. Google confirms who you are and sends Presence a signed, single-use proof that expires within minutes.
- Your password keeps working. Google is simply another way in.
The Presence website
The Presence website (where you book a demo, send a query or request a quotation) has its own account, separate from the app. You need it to send a form.
Create an account or sign in
- Click Sign in at the top of any page (or Create an account at the bottom), or Continue with Google on a form.
- Choose your Google account. Any email address that has a Google account works - Gmail, a college address or a work address. The first time creates your website account; there is no password to remember.
- You come back signed in. The header shows your initials instead of Sign in, and forms open with your name and verified email filled in.
My account
Click your initials → My account to see:
- your name and Google-verified email, when you joined and when you last signed in;
- every form you have sent us (demo bookings, questions and quotation requests), with dates;
- on how many devices you are signed in, with Sign out on all devices;
- Delete my website account, which removes the account and its list of forms.
Security check on forms
Above each form’s button, a Cloudflare box checks that you are a person. It usually ticks itself; if it asks, tick the box. After about five minutes, or after a failed send, it refreshes on its own.
Good to know
- The website keeps only your name, email and Google’s account identifier, never a password.
- Sign out is in the menu under your initials, on My account and on each form.
- Signing in to the website does not sign you in to the app, and app accounts cannot be used on the website.
Two-factor authentication
Two-factor authentication adds a 6-digit code from an authenticator app on your phone to every sign-in - with a password or with Google. It is strongly recommended for anyone who can change institution data: administrators, deans, heads of department, office staff and the Animweb platform team.
To turn it on:
- Install an authenticator app: Google Authenticator, Microsoft Authenticator, Authy or 1Password.
- In Presence, open Profile → Two-factor authentication → Set up two-factor.
- Scan the QR code and enter the code the app shows.
- Save the 10 recovery codes somewhere other than your phone. Each one signs you in once if you lose the phone.
If you lose your phone: sign in with a recovery code, then turn two-factor off and on again with the new phone. If you have no recovery codes left, an institution admin can use Users → Actions → Reset two-factor.
Forgot your password?
Select Forgot password? on the sign-in page and enter your institution code and email or roll number.
- If your account has an email address, you receive a one-time link that expires in 30 minutes. Choosing a new password through it signs you out everywhere.
- If it does not, ask your institution’s administrator. They can issue a temporary password from Users → Actions → Reset password.
- If your institution uses Sign in with Google, you can still sign in with Google while you reset your password.
For privacy, the page shows the same message whether or not an account matches.
Staying signed in
- Presence keeps you signed in on a device for up to 30 days after you last used it, so students do not have to sign in before every class.
- Behind the scenes, your access renews every 15 minutes and each renewal can be used only once.
- If your administrator deactivates your account, resets your password or signs you out, every device is signed out at its next renewal.
Signing out
On this device
Tap the Sign out icon next to your name at the bottom of the menu. On a phone, open the menu (☰) first.
Signing out:
- ends this device’s session on the server, not only in the app;
- clears the data Presence keeps on the device, such as cached pages;
- tells Google not to choose your account automatically next time, if you signed in with Google. You stay signed in to Google itself - sign out of Google separately on a shared computer.
Students: do not sign out during a class. Verification stops when you sign out and you are checked out of the class; you would have to sign in and rejoin with the current code.
On every other device
Open Profile → Signed-in devices. It lists every browser and phone signed in to your account, with the network and when each was last active.
- Sign out next to a device ends that one.
- Sign out other devices ends all of them except the one you are using.
Do this if you lose a phone, used a shared or public computer, or see a device you do not recognise - and change your password.
When Presence signs you out
| What happens | Effect |
|---|---|
| You change or reset your password | Every other device is signed out |
| An administrator deactivates your account | Every device is signed out |
| An administrator resets your password | Every device is signed out; you sign in with the new temporary password |
| An old renewal token is used again (possible theft) | Every device is signed out |
| 30 days without opening Presence on a device | That device is signed out |
Built-in protections
| Protection | What it does |
|---|---|
| Account lockout | 10 wrong passwords lock the account for 15 minutes |
| Verification challenge | After repeated failures, sign-in asks for a quick human check (Cloudflare Turnstile) |
| Short sessions | Access tokens last 15 minutes and renew silently; renewal tokens are single-use |
| Theft detection | Re-using an old renewal token signs the account out everywhere |
| Request protection | Session renewal only works from the Presence app itself (cross-site requests are refused) |
| Google proof checked on the server | Google’s signature, our client ID, the expiry, a single-use code and a verified email are all required |
| Google account link | After the first Google sign-in, only that Google account can sign in to the Presence account |
| Audit log | Google sign-ins, new links, refused links and recovery-code sign-ins are recorded |
For administrators: turning on Sign in with Google
- Open Settings → Sign in with Google and turn on Allow Sign in with Google.
- Optionally enter your email domains, for example
your-university.edu, so only college Google accounts are accepted. - Make sure each person’s email in Users is the one they use with Google.
- Save. The button appears on the sign-in page for your institution.
If the setting says the deployment has no Google client ID yet, ask Animweb Technologies, or your IT team on your own domain, to complete Setting up Sign in with Google.
Changing a person’s email removes their Google link automatically. Users → Actions → Reset Google link removes it by hand, for example when someone changes Google accounts.